stiperformanceparts.com is an independent retailer of aftermarket performance parts and is not a subaru authorized or approved sti parts dealer or repair facility.
Aftermarket Performance Parts for the Sti
|
AMS 02-07 SUBARU STI/WRX ROTATED MOUNT GT3076R V-BAND TURBO KIT
PRODUCT OVERVIEW
The AMS 2002-2007 Subaru
WRX/STI Rotated Mount V-band Turbo Kit is the new benchmark in Subaru
performance. Designed to meet the demanding needs of road race, drag race and
street cars alike, we have successfully achieved unparalleled drivability,
response, and horsepower. Our unique design has been tested and refined for
over 1 year to provide reliability, OEM like fitment and options never available
in a Subaru turbo kit before.
The AMS kit brings some new ideas to the
table
Each AMS Subaru Turbo Kit
incorporates the latest V-band exhaust housings with options for .63, .82 or
1.06 a/r. The TiAL V-band housings not only provide the most horsepower and
save weight but they eliminate the need for gaskets and are easier to install.
No more annoying exhaust leaks and no gaskets to replace!
- Top Mount & Front Mount Intercooler
Applications
Another innovative feature of our
kit is the option of a 4ply silicone turbo outlet pipe for either a front mount
or top mount intercooler. These custom molded pieces fit better than the OEM
pieces and are included at no additional charge!
While a unique 3 cold air intake
pipe is standard we also provide an option for pull-through or push-through MAF
applications.
- Factory ECU & MAF Solution
We provide the option of an
industry first 4 ply silicone BOV recirculation tube for cars maintaining the
factory ECU and MAF.
- Cast Stainless Steel V-band Up-pipe
Implementing CAD and Casting
designs we are able to produce not only an extremely strong and reliable piece
but one that is not limited to the restrictions of a hand fabricated up pipe.
Smooth transitions, optimal pipe diameter and solid construction make the
Up-pipe another key component to the AMS Subaru Rotated mount Turbo
kit.
Each AMS Subaru Rotated Mount V-band Turbo Kit is hand built
here at AMS with a meticulous attention to detail. We know what its like to
install a turbo kit so we provide all the necessary hardware and detailed
instructions for a hassle-free installation.
With power output ranging
from 350 650 horsepower we have just about every Subaru owner covered. On just
our GT30R kit with a top mount intercooler, fuel and exhaust upgrades we were
able to put down 485 whp and over 500 ft. lbs. of torque! This same simple
combination netted an 11.3 quarter mile time in a full weight 2007 STI on stock
tires!!! Imagine what a GT35R can do!
Features
- 2 ID rotated V-band cast stainless steel
up-pipe for optimum flow and durability
- 5/8 thick flange on up-pipe to ensure a
proper seal
- Turbo support bracket maintains turbo kit
reliability under any condition
- 304 stainless steel TIG welded
construction
- Lifetime Limited Warranty on the
up-pipe*
- True Garrett Dual Ball Bearing GT series turbo
with ported shroud compressor covers to prevent compressor surge
- TiAL Stainless Steel V-band exhaust housing
with choice of .63, .82 & 1.06 a/r ratios
- Your choice of a genuine Tial 44mm or 38mm
V-band wastegate to ensure proper boost control
- Wastegate feed strategically placed on the
Up-pipe for precise boost control
- 10 stainless steel external wastegate dump
tube
- No gaskets needed for the turbo to up-pipe,
up-pipe to wastegate or turbo to downpipe
- Your choice of true 3 cold air intake pipes
to suit a pull through or 3 blow through mass air flow sensor intake
pipe
- Bolts up to any stock or aftermarket header
that fits the factory up-pipe
- Downpipe fits AMS & most other aftermarket
cat-back exhausts
- Your choice of turbo outlet pipes for top
mount or front mount intercooler application.
- Kit Utilizes 4 ply silicone tested up to 50
psi of boost!
- Industry first 4 ply silicone Blow off valve
recirculation tube for cars looking to maintain the factory ECU and MAF
(optional)
- New coolant lines for your coolant expansion
tank for a clean engine bay
- DEI heat insulation to protect OEM wiring from
excessive heat
- Kit includes ALL necessary fittings and
hardware for installation
- Class 10.9 fasteners & 4 ply silicon
couplers. We use the best hardware and silicone so that it goes together right
the first time
Kit Includes
- Cast stainless steel Up-pipe
- AMS spec TiAL GT series dual ball bearing
turbo with ported compressor cover and Tial V-band turbine housing
- Genuine Tial 44mm or 38mm V-band
wastegate
- Integrated turbo support bracket
- AMS high off-road test-pipe (high-flow steel
core catalytic converter optional)
- DEI Heat insulation for your electrical wiring
- New lines for your coolant expansion
tank
- Stainless steel 3 downpipe with integrated
Stainless steel flex section
- Stainless steel oil feed line (fittings for
both WRX and STI included)
- Custom AMS stainless steel oil return
line
- 4 ply silicon water lines with thermal
insulation
- 4 ply silicone 2.5 turbo outlet pipe,
intercooler and intake couplers
- Top quality hardware package including nuts,
bolts, fittings and clamps
- Polished aluminum 3 cold air intake pipe with
K&N air filter for blow through MAF (pull trough MAF optional)
- Detailed installation guide
Options
- Your choice of top mount or front mount 4 ply
silicone turbo outlet pipe (no additional charge)
- Your choice of .63, .82 or 1.06 a/r exhaust
housings (no additional charge)
- Blow off valve recirculation
- 3 Pull through MAF intake pipe (optional) or
3 Blow through MAF intake pipe (standard)
- High-flow catalytic converter
- Tial 44mm (optional) or 38mm V-band (standard)
wastegate
Applications
- Subaru 02,03,04,05,06,07 STI/WRX
- Fits all USDM and European left hand drive
models vehicles
* Due to variances in
aftermarket exhaust systems it is recommended to use the AMS cat-back exhaust
system with this kit for the best fitment.
RECOMMENDED PRODUCTS LIST
Customers who bought this product also bought the following products:
REVIEWS
There are no reviews available for this product.
Write your own review.
|
|
stiperformanceparts.com is not a subaru authorized sti parts dealer or repair facility. stiperformanceparts.com is not affiliated, related to, or endorsed by Subaru of America or Fuji Heavy Industries LTD in any way. stiperformanceparts.com is an independent retailer of performance parts and accessories that is not affiliated with Subaru of America (Fuji Heavy Industries LTD). Use of trademarks is done on a fair use basis and without intent to compete with, or take advantage of Subaru or its trademarks. For more information on Subaru please visit http://www.subaru.com
